Concrete pool decks in Anchorage AK - a surface that grips when it's wet
Slick, flaking or cracked concrete around your pool? We build or resurface the deck with a textured finish that grips wet feet.
- Grip comes first We start with a textured finish, then match your look.
- Honest resurface call I check the old surface and tell you which makes sense.
- Owner on every pour I estimate your job and work the pour with my crew.
- Pours planned for cold We pick pour dates with Anchorage weather in mind.
- Fully licensed and insured.
- Free on-site estimates.
- We reply within 1 business day.
How do you know your pool deck needs work?
A pool deck takes water, sun and Anchorage winters. Small surface problems usually let more water in, and that's how a simple fix turns into a tear-out.
Slick spots when it's wet
Smooth or worn patches feel slick under wet feet. Usually the texture has worn down or was never there, and it stays a fall risk until it's fixed.
Flaking or peeling surface
The top layer comes off in flakes or patches. That's usually water getting into the surface and freezing, and it spreads a little more each winter you leave it.
Cracks that keep growing
Hairline cracks are common, but wide ones or cracks with raised edges usually mean the base moved. Water gets in, freezes and pushes them open further.
Sunken or tilted slabs
A section that dropped or tipped leaves a trip edge right by the water. Usually the ground under it settled, and the gap only gets worse with time.
Puddles that won't drain
Water that sits after a swim, or runs toward the house, means the slope is off. Standing water soaks into the slab and freezes there come fall.
Peeling coating or chipped edges
A coating that's lifting or edges breaking off along the pool catch bare feet. Caught early, it may be a resurface job rather than a whole new deck.
How we build and resurface concrete pool decks
I start by looking hard at the old deck, because a resurface only holds on a slab that's still sound, and I'll tell you honestly which way makes sense. For a new deck, we tear out, then dig down and pack the subgrade, the ground the slab sits on, so it doesn't settle with the dirt later. We set the slope so water runs off the deck and away from the house, and we lay rebar, the steel inside that holds the slab together if it cracks. Around a pool, grip comes first, so we start with a textured finish like a broom finish, fine ridges dragged into the wet surface for footing, and then match the look you want. We cut control joints, shallow grooves that give the slab a planned place to crack, and let it cure, the wait while it hardens before you use it. If the budget's tight, I'd keep the base work and go plainer on the finish, because nobody sees the base on day one but it decides whether the deck stays flat. Price moves with the deck's size, resurfacing versus tearing out, and the finish you pick. The schedule moves with the weather more than anything. Your written estimate gives you the figure for your deck.
Pool decks often run into steps down from a door or a slope, and we can pour concrete steps in the same finish so the footing matches all the way down. If a pool house or shed is going in beside the deck, our slab foundation building gives it a flat, solid base built the same careful way.
What happens when you call about a pool deck in Anchorage?
From your first call to the final walk-through, you deal with me, and the weather decides the pour date.
Call or send a message
Call (907) 206-3358 or use the form. I come out, look at the deck and ask how you use it and what you want.
Get a written estimate
You get the estimate in writing, with whether I'd resurface or replace and which finish fits. It spells out the work before anything starts.
Permits and a pour date
Once you say go, we line up any permits and pick a pour date around the weather. I work the pour with my crew.
Walk the finished deck
We clean up and walk the deck together before we call it done. I'll go over how to treat it through the first winter.
Why Anchorage homeowners call Monolith Anchorage Concrete Company
The owner works your pour
I look at every job, write the estimate and pour alongside my crew, so nothing gets lost between the estimate and the work.
Pours planned around Anchorage cold
We've been in business since 2013 and plan every pour around cold weather. Your date follows the forecast, not our calendar.
Licensed in Alaska, insured for every job
We're fully licensed and insured. Alaska won't let anyone bid concrete work without state registration, so ask every bidder for theirs.
Satisfaction guaranteed on every job
We put that on every deck we pour. You get straight answers before work starts, including when a resurface won't hold.
Get a written estimate for your pool deck
Tell us the deck's rough size, what's on it now and whether you're thinking resurface or replace. We reply within one business day, and I come out for a free on-site estimate with no obligation.
Pool deck finishes to look through
Look through these examples of concrete pool decks and finishes to get a feel for the texture and look you'd want around your pool.
Pool deck questions we hear
These are the questions Anchorage homeowners ask most about pool decks. If yours isn't here, call and ask, and I'll give you a straight answer for your deck.
Is resurfacing cheaper than a new concrete pool deck?
Resurfacing typically costs less than pouring a new deck, but it only holds up with thorough prep and bonding agents. When you compare a resurfacing bid with a new-deck bid, ask each crew exactly how they'll prepare the old surface.
What is the best way to make a concrete pool deck less slippery?
Pick a textured finish, because around a pool, slip resistance matters more than anything else. Broom finish, exposed aggregate where the stones in the mix show at the top, cool-deck coatings and lightly stamped patterns all give grip on wet concrete, so the choice between them comes down to the look you like.
Can a concrete pool deck be poured in cold weather in Anchorage?
Yes, as long as the fresh concrete is kept from freezing before it gains strength. A Michigan concrete group's guide counts it as cold weather when the air drops to 40°F, or is expected to, while the concrete is being protected, so early-fall and late-spring nights can qualify. The same guide says to pour only on thawed ground, warming frozen ground with heaters or blankets first, so ask any crew how they'll handle that. I'd rather move a pour date than gamble on a cold night.
How do I deal with ice on a new concrete pool deck the first winter?
Use sand for traction and skip deicers that first winter, which is what a Michigan concrete group's guide advises for new concrete. After that, the guide lists magnesium or calcium chloride, fertilizer and water-softener salt as things to keep off concrete, because chemicals like these make surface flaking worse. It's also worth asking whether your deck's mix is air-entrained. That's air worked into the concrete on purpose, and it helps it stand up to freezing, thawing and ice-removal chemicals.
Do I need a permit for a concrete pool deck in Anchorage?
Ask the Municipality of Anchorage permit counter at 343-8211 or permitcounter@muni.org, because that's who takes permit questions in Anchorage. If your job needs one, we handle the paperwork with the Municipality where we're able to. If any part has to come from you or someone else, I'll tell you plainly who and what they'll want.
How much does a concrete pool deck cost in Anchorage?
I can't give you a fair number until I've seen the deck in person, and then you get it in writing. Tearing out an old deck and rebuilding the base costs more than a resurface, but that base is where I'd spend first. A broom finish is the plainest option, while exposed aggregate, a coating or a stamped pattern adds work and cost.
Where we pour pool decks
We're based in Anchorage and work the cities around it too. Pick your area below, or call if you're not sure we come out your way.
Talk to us about your pool deck
Get in early and there's more room to land your pour in a good-weather week.